Fabrication shouldn’t be the black box on your schedule.
Pipesurf gives EPC teams a live, signed record of every joint and spool, from the approved joint list to the dispatched spool.
Sound familiar?
A weekly progress spreadsheet.
Already out of date when it lands, and impossible to check.
Quality questions with slow answers.
Which heat, which welder, which WPS? The answer takes days to find.
A dossier that arrives after the spools.
And the handover waits for it.
Design changes that reach the yard late.
Joints get welded to a drawing that’s already superseded.
Every spool, followed joint by joint
The record your team, your client and your auditors ask for is built as the spool moves. Hover a joint to see it.
12345678MT fail · rework · retest ✓PWHT · 620 °C · 1 h- 01Joint listSPL-020 comes in on the approved joint list: eight shop joints, checked and approved.
- 02StagingIts parts wait until the Production Engineer releases the spool to the yard.
- 03Fit-UpEvery joint is fitted and tacked, with heat numbers picked for both sides.
- 04WeldingThe WPS is set and each pass is recorded with its welder.
- 05PWHTJoints that need heat treatment are routed there automatically.
- 06NDT and other testsResults go on the joint. SW-5 fails, is reworked and passes its retest.
- 07HydrotestThe spool is tested as one unit.
- 08PaintingPainted, inspected and signed off by Painting QC.
- 09DispatchApproved for dispatch with its documents attached.
What changes
Progress you can trust
Joint and spool status comes from the people doing the work, as they do it, in joints and inch-dia.
Traceability on demand
Material, procedure, welder and test reports on every joint.
Handover-ready records
Test reports, delivery notes and packing lists attached as the job runs.
Controlled change
Revisions reach the yard through approval, with the impact shown first.
Ask any joint what happened to it
Heat numbers per side, WPS and welder per pass, NDT results and reports, all on one page for every joint.
Built for your projects
Configure each project to its specification, invite outside contractors into the roles they play, and run several projects on one set of company standards.
Every joint. Every spool. Under control.
See how Pipesurf would run your next fabrication package. 30 minutes.